Instuctions for DIY Aiwa Modifications
Below are examples of the installation instuctions for Aiwa DIY upgrades. These refer to either a Service Remote mod, or a DIY service disc.
Full upgrade instructions are included with each upgrade supplied by us. You will only be sent the firmware disc or service remote code for the model you select, so please ensure you order the correct one!
Please be aware that you perform a DIY modification at your own risk!
On no account do we accept any responsbility whatsoever for any damage caused when performing a modification yourself. If in doubt, use our fitted modification service.
Service Disc based upgrades
1. Switch on the unit, open the drawer, and insert the mod disc. 2. Press Play. After a few seconds, you will see a menu with options. 3. Using the players original remote control, follow the onscreen instuctions. 4. Eject the disc. 5. Switch the machine into standby. Unplug from the mains. 6. Plug the machine back in. Installation is complete. 7. The upgrade is complete. ENJOY!
Service Remote based upgrades
1. Put the machine into standby mode (make sure no disc is inserted!). 2. Press the transmit key ONCE on the service remote (pressing transmit again will erase the commands!) 3. After a few seconds, the remote will stop transmiting, and the player will either switch itself on, show "sucess" or "timer ok" on the display, or beep (depending on model). 4. Unplug the unit from the mains, then plug back in. 5. The upgrade is complete. ENJOY!