Instuctions for DIY Denon Modifications
Below are examples of the installation instuctions for Denon DIY upgrades. These refer to a DIY service disc.
Full upgrade instructions are included with each upgrade supplied by us. You will only be sent the firmware disc for the model you select,
so please ensure you order the correct one!
Please be aware that you perform a DIY modification at your own risk!
On no account do we accept any responsbility whatsoever for any damage caused when performing a modification yourself. If in doubt, use our fitted modification service.
Rental Service Disc based upgrades
1. Switch on the recorder, open the drawer, and insert the mod disc. 2. Press Play. After a minute, the disc will stop. 3. Using the players original remote control, follow the sequence of button key-presses as supplied for your specific upgrade. 4. Switch the machine into standby. Unplug from the mains. 5. Plug the machine back in. Installation is complete. 6. The upgrade is complete. ENJOY!
DIY Disc based upgrades
1. Switch on the unit, wait for "no disc" to be displayed (make sure no disc is inserted!). 2. Insert modification disc, and wait 3. After a while, the tray will open. Take out the disc, press standby. 4. Unplug the unit from the mains, then plug back in. 5. The upgrade is complete. ENJOY!